ProtoBridge Send us a part
← ProtoBridge
Representative work

Representative jobs, anonymised at customer request.

Almost every part we make belongs to someone who does not want it photographed on a supplier's website. That is the correct instinct, and it means this page has descriptions instead of a glossy gallery. If you want to see a specific capability, ask and we will show you the relevant part during a call.

Three typical jobs

Same five fields each time: what the part is, what it is made of, how many, how long to first article, and what actually made it difficult. The last field is the only one worth reading.

Job 01 · Magnetics
Part
PART TYPE, e.g. arc segment, 4-pole
Material
MATERIAL, e.g. NdFeB N42SH, NiCuNi
Quantity
N
Enquiry → first article
N days
What was hard
ONE SENTENCE — the specific constraint, not "tight tolerance"
Job 02 · Ceramics
Part
PART TYPE, e.g. thin-wall zirconia sleeve
Material
MATERIAL, e.g. 3Y-TZP
Quantity
N
Enquiry → first article
N days
What was hard
ONE SENTENCE — e.g. shrinkage compensation on a 1.2 mm wall
Job 03 · Carbide
Part
PART TYPE, e.g. non-standard forming punch
Material
MATERIAL, e.g. WC-Co, 10% Co
Quantity
N
Enquiry → first article
N days
What was hard
ONE SENTENCE — e.g. a 0.3 mm edge radius that had to be measured, not eyeballed
Fill these in from real orders. Three completed jobs with honest numbers beat twenty invented ones. If a job ran late, the "what was hard" line is where you say so — buyers trust a supplier who admits one bad week far more than one whose every project went perfectly.

What we cannot show you

Worth being explicit, because the absence of photos looks like something it is not.

  • Customer names, logos or end products.
  • Photographs of parts that belong to a customer's program.
  • Testimonials written on someone else's behalf. If a customer wants to talk to you, that is their choice and their introduction to make.
  • Certifications we do not hold. See what we do claim.

What you can see instead

Three things that are more useful than a portfolio page.

01

The inspection report

Ask for a redacted sample report from a real batch. It shows what you will receive, with the customer's data removed.
02

One part, made once

Send one part of your own. A single piece tells you more about a supplier than any case study.
03

The floor, on a call

Fifteen minutes with a camera pointed at the machines that would run your job.

Send the part you actually need made.

Not a similar one, not a description of one. The real drawing or the real part, and we will tell you honestly whether it is a good fit for what we run.

Send us a part